Skier's Choice Moomba Kamberra, Owner'S Manual

Page: 19 / 66

19
© 2002 Skier’s Choice, Inc.
BREAK IN
Taking care to properly break in your new engine will pay off
in the long run. In our years of field testing, we have proven
that an Indmar engine, when properly broken in according
to our simple procedures, will last longer, run better and have
fewer repairs over its lifetime.
Your new engine does not require an elaborate break-in
procedure. Just follow these simple instructions and you
are off to a great start.
The three (3) most important aspects of new engine break-
in are:
1. Avoid running engine at high speeds.
2. Do not carry a heavy load (passengers, gear, etc.).
3. Vary your boat speed during break-in, don’t run at the
same RPM for a long period of time.
BREAK-IN STEPS
- For the first hour, do not exceed 2,000 RPM.
- For the second hour, do not exceed 3,000 RPM.
- For the next five hours, do not exceed 4,000 RPM.
BREAK-IN TIPS
- Avoid fast accelerations and don’t carry (or pull) a heavy
load during this period.
- Always let engine warm up gradually before acceleration.
- Check oil frequently. During the first 50 to 100 hours, an
engine can use more oil than usual. Maintain oil at a proper
level at all times (do not overfill).
- Monitor transmission fluid levels.
- Report abnormal noises or vibrations to your dealer.
- Keep an eye out for loose mountings, fittings, nuts, bolts,
and clamps.
During the BREAK-IN process, engine temperature should
be carefully monitored and speed should be reduced if
overheating is evident.
ALSO, PLEASE REFER TO
ENGINE OWNER’S MANUAL FOR BREAK-IN
INFORMATION.
NOTICE: PLEASE REFER TO ENGINE OWNER’S
MANUAL for maximum RPM and engine break-in
procedure.
After the first 10 to 20 hours of operation, take your boat to
the dealer for its first oil and filter change, as well as an
engine checkup. Remember to keep a sharp eye on all
gauges and warning lights during these first hours of
operation. Report anything unusual to your dealer.
After the break-in procedure is over, your boat may be
operated continuously at any speed.
Do not exceed maximum RPM recommended for your
engine. Exceeding the maximum RPM may result in
damage to the engine.
Before starting your engine you must open the engine
box and check engine compartment and bilge for
gasoline and oil vapors.
Section V
Operating Information