Ski-Doo REV series 2007, Operator'S Manual

Page: 76 / 255

Push and hold mode button for 2 seconds to reset the hourmeter.
Multifunction Display code
If your speedometer shows SCALE in the multi-function display, it
means that the display selector button is stuck in the down position
or depressed when the electrical system was activated.
Unit Selection (MPH vs km/h)
All Models
The speedometer is factory preset in miles but it is possible to
change it to kilometer reading, refer to the following procedure or
contact an authorized SKI-DOO dealer.
NOTE: Speedometer, odometer and trip meter will have their units
(kilometer or miles) changed all together.
Stop engine and open LH side panel.
Connectors are located underneath console near steering column.
Underneath console, look for:
– 1 circuit male connector housing with BLACK/GREY wire
– 1 circuit female connector housing with BLACK/BLUE wire.
Cut locking ties. Plug connectors together to change units from
miles to kilometers.
Unplug to return to miles reading. Fasten connector to harness with
locking ties.
74
_________________________