Ski-Doo REV series 2007, Operator'S Manual

Page: 143 / 255

Suspension Adjustments
Snowmobile handling and comfort depend upon suspension adjust-
ments.
For factory recommended adjustments refer to decal on belt guard.
It describes settings for optimum comfort according to load for your
SKI-DOO model.
Choice of suspension adjustments vary with carrying load, driver's
weight, personal preference, riding speed and field condition.
NOTE: Some adjustments may not apply to your snowmobile. Use
special keys in tool kit.
1
A35F01A
5 2
3
4
TYPICAL — SC4 — MX Z X PACKAGE
1. Rear springs adjustable cams for comfort and ride height
2. Center spring for steering behavior (not adjustable on all models)
3. Stopper strap for snowmobile weight transfer
4. Coupling blocks — Handling
5. Rear shock motion ratio — Damping strength (not adjustable on all models)
6. Front springs for handling (not shown)
Following are guidelines to fine-tune suspension.
The best way to set up the suspension, is to start from factory set-
tings, then customize each adjustment one at a time. Adjustments
2 through 6 are interrelated. It may be necessary to readjust center
spring after adjusting front springs for instance. Test run the snow-
mobile under the same conditions; trail, speed, snow, driver riding
position, etc. Change one adjustment and retest. Proceed method-
ically until you are satisfied.
_________________________
141