Ski-Doo MX Z Iron Dog, Operator'S Manual

Page: 62 / 147

CONTROLS, INSTRUMENTS AND EQUIPMENT
10. Disconnect the APS hose at the
ECM.
mbl2012-008-004_a
1. ECM
2. APS hose
11. Remove the four upper body mod-
ule retaining screws, two on each
side.
mbl2012-008-005_a
LH SIDE SHOWN
1. Retaining screws
12. Tilt the upper body module 5 de-
grees up towards the top section
and then push it towards the front
of the vehicle.
13. Remove the upper body module.
mbl2012-008-006_a
SLIDE TOWARDS FRONT
Upper Body Module Installation
1. Insert the upper body module tabs
into the upper bottom pan open-
ings.
mbl2012-008-009_a
1. Upper body module tab
2. Upper bottom pan opening
2. Slide the module towards rear.
mbl2012-008-006_b
SLIDE TOWARDS REAR
3. On both sides, install the upper body
module retaining screws.
60
______________