Ski-Doo MX Z Iron Dog, Operator'S Manual

Page: 42 / 147

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2014-004-001_c
TYPICAL
1. Start/Electronic Reverse button
2. Headlights dimmer switch
3. Heated grips
4. Heated throttle lever
5. Mode/set button
Start/Electronic Reverse Button
On electric start models, press to start
engine. Refer to
ENGINE STARTING
PROCEDURE in the BASIC PROCE-
DURES
subsection.
Electronic Reverse Models
Once engine is started, press to en-
gage the electronic reverse. Refer
to
REVERSE (RER) in BASIC PROCE-
DURES
section for procedure.
Headlights Dimmer Switch
Press to select HI or LOW beam.
Lights are automatically ON when the
engine is running.
Heated Grips Switch
NOTE: Under 2000 RPM, heated grips
will be limited at 50%.
Depress switch as required to select
heating intensity to keep your hands at
a comfortable temperature.
mmo2014-004-001_d
VARIABLE INTENSITY
1. Heated grip switch
2. Increase heat
3. Decrease heat
The heating intensity is displayed via
the digital display.
NOTE: There are nine intensity set-
tings. When released, display will re-
turn to engine coolant temperature (if
equipped).
mmo2007-009-043_b
HEATING INTENSITY DISPLAY
1. Less heat
2. More heat
Heated grips will be in OFF position
when there are no bars displayed on
the gauge.
Heated Throttle Lever Switch
NOTE: Under 2000 RPM, heated
throttle lever will be limited at 50%.
Depress switch as required to select
heating intensity to keep your thumb
at a comfortable temperature.
40
______________