Ski-Doo MX Z Iron Dog, Operator'S Manual

Page: 47 / 147

CONTROLS, INSTRUMENTS AND EQUIPMENT
4) Pilot Lamps and Messages
mmo2013-004-045_b
TYPICAL — PILOT LAMPS
See table below for usual pilot lamps information. Refer to MONITORING SYS-
TEM
for details on malfunction pilot lamps.
PILOT
LAMP(S)
ON
BEEPER MESSAGE DISPLAY DESCRIPTION
4 short
beeps
every
5 minutes
LOW OIL
Injection oil level is low. Stop vehicle in a safe place then,
replenish injection oil reservoir.
— —
Low fuel level. One (1) bar left in fuel level display.
Replenish fuel tank as soon as possible.
Long
beeps
repeating
slowly
REVERSE Reverse is selected.
3 short
beeps
REV. FAIL Reverse did not engage, try again.
— —
High beam headlights are selected.
— —
WARM UP
Engine and/or injection oil need to warm-up before normal
operation. The engine's RPM is limited until desired
temperature is reached (up to 10 minutes when driving).
Warm-up period may occur after a restart in very cold
weather.
5) MODE (M) Button
Button use to navigate in gauge multi-
function display.
NOTE: MODE (M) button on the multi-
switch housing has the same functions
and can also be used.
6) SET (S) Button
Button used to navigate, adjust or re-
set gauge multifunction display.
In order to memorize settings, engine
must be running.
NOTE: SET (S) button on the multi-
function switch has the same func-
tions and can also be used.
_______________
45