7. Shutdown
7.1 Temporary shutdown
You can temporarily shut down the de-
scribed product by disconnecting the electri-
cal, pneumatic, and/or hydraulic supply con-
nections. For more information, see the
section
General information
in this manual.
If you wish to shut down the product tem-
porarily, refer also to the instructions in the
section
Transport, delivery, and storage
of
this manual.
When placing the product back into op-
eration, refer to the information in the sec-
tions
Installation
and
Commissioning
of this
manual.
7.2 Permanent shutdown
All country specific legal guidelines and leg-
islation on the disposal of contaminated
equipment must be observed when shutting
down the product for the final time.
The system can also be taken back by SKF
for disposal if the costs are covered.
!
Caution!
Lubricants can contaminate the
ground and watercourses. Lubricants
must be used and disposed of in compli-
ance with the rules. Instructions and lo-
cal regulations must be observed when
handling lubricants.
33
