SKF OLA Series, Owner'S Manual

Page: 44 / 52

8. Maintenance page 44
EN
8. Maintenance
Danger!
To prevent chance of serious injury or
death, disconnect the product from main
power supply before working on it.
Installation, maintenance, and repair
work may only be carried out by qualified
experts on a product that is not
connected to a power supply.
Danger!
Centralized lubrication systems are un-
der pressure when they are being oper-
ated. Centralized lubrication systems
must therefore be depressurized before
starting installation, maintenance, or re-
pair work and before making any
changes to the system.
Danger!
The described product may be under
pressure when it is being operated. The
product must therefore be depressurized
before starting installation, maintenance,
or repair work and before making any
changes to the system.
SKF Lubrication Systems Germany GmbH products
are low-maintenance. However, to ensure that they
function properly and to avoid risks right from the
startup, all joints and connections should be
checked to make sure that they are properly fitted.
If necessary, you can clean the product using
gentle, material-appropriate cleaning agents (no
alkalis, no soap). For safety reasons, the product
should be disconnected from the hydraulic and/or
compressed air supplies before cleaning.
During cleaning, it is important to make sure that
no cleaning agent enters the inside of the product.
If the system is operated normally with intercom-
patible lubricants, the inside of the product does not
need to be cleaned.
If you accidentally fill the product with an incorrect
or contaminated lubricant, the inside of the product
does have to be cleaned. If this occurs, contact SKF
Lubrication Systems Germany GmbH Services for
more information on cleaning procedures
You must not dismantle the product or
parts of the product during the warranty
period. Doing so invalidates all warranty
claims.
Only original SKF Lubrication Systems
Germany GmbH spare parts may be
used. You must not carry out alterations
to the product or use non-original spare
parts or resources. Doing so invalidates
the warranty.
SKF Lubrication Systems Germany GmbH is not
liable for damage caused by improper installation,
maintenance, or repair work.