SKF LUBRILEAN Vario, Operating Instructions Manual

Page: 4 / 32

Information for declaration of EU conformity and manufacturer's declaration Page 4
EN
The following product:
L
UBRI
L
EAN
®
Vario
has been endorsed as meeting the main safety
requirements, which are defined in the
guideline(s) of the council for the conformity of
the legal requirements of the member states ...

Electromagnetic compatibility
89/336/EEC
Remarks
(a) This declaration certifies the compliance
with the specified directives but does not,
however, contain any assurance of
properties.
(b) The safety warnings in the documentation
included with the product are to be
observed.
(c) The commissioning of the certified product
is prohibited until it has been guaranteed
that the machine, vehicle or similar in which
the product has been installed complies
with the stipulations and requirements of the
relevant directives.
(d) The operation of the product with non-
standard voltage as well as non-observance
of installation indications can have
consequences affecting the EMC properties
as well as electrical safety.
Additionally, we declare that the aforementioned
product:

is defined in accordance with EU machine
directive 98/37/EU, Appendix II B for
installation in machines / for use with other
machines. The commissioning is forbidden
until it has been established that the machine
in which these parts or with which these parts
are assembled complies with EU directive
98/37/EU.

must only be used in reference to the EU
directive 97/23/EU pertaining to pressure
devices
only properly and according to the
indications contained in the documentation.
Here the following are especially important:
SKF products are not designed or permitted
for use with liquids of the Group I (hazardous
liquids), definition according to Article 2,
Paragraph 2 of Directive 67/548/EEC from 27
June, 1967.
SKF products are not designed or permitted
for use with gases, liquefied gases, gases
under pressure in solution, steam and liquids
with a vapour pressure more than 0.5 bars
above the normal atmospheric pressure
(1013 mbar) for the maximum permitted
temperature.
When used properly, the products provided
by us do not reach the limit values listed in
Article 3, Paragraph 1, Number 1.1 through
1.3 and Paragraph 2 of Directive 97/23/EU.
They are therefore not subject to the
requirements of Appendix I of the directive.
They therefore also do not receive any CE
marking with respect to directive 97/23/EU.
They are classified by us according to
Article 3, Paragraph 3 of the directive.
SKF products must only be used in
accordance with regulations and
requirements. The use or commissioning of
the products in areas with gassy or dusty
atmospheres where there is a danger of
explosion is not permitted.
If necessary, you may request the declaration of
conformity or the manufacturer's declaration for
this product by contacting us at our central
contact address.
2 Information for declaration of EU conformity and manufacturer's declaration