1
- 9 -
951-181-022-EN
Version 03
EN
1st Safety instructions
○
Never use any part of the centralized
lubrication system as a stand or step or
for climbing.
1.3 Intended use
The SKF
Lubrication Remote Monitor LRM2
monitors SKF lubrication points that are not
connected to the control unit of the system/
machine or vehicle.
In the event of an empty reservoir or an-
other lubrication problem, the LRM2 sends
an SMS or, depending on the configuration,
an e-mail to one or more cellular phones.
The data can optionally be transferred with
the process control level at the customer.
The LRM2’s field of application includes
industrial applications; use in mobile ap-
plications is possible only after consultation
with SKF.
The connection of the SKF Lubrication
Remote Monitor is customer-specific. The
customer must ensure that there is suffi-
cient, continuous network reception. It must
also be ensured that no electromagnetic
interference can occur. The corresponding
1.5 Modiications to the product
Unauthorized modifications and changes
can have an unpredictable effect on safety.
Unauthorized modifications and changes
are therefore prohibited.
1.6 Prohibition of certain activities
The following activities must be performed
only by employees of the manufacturer or
authorized persons due to possibly unde-
tectable sources of error or due to statutory
requirements:
o Repairs or modifications
Electromagnetic Compatibility standards
must be observed.
Any other usage is deemed non-compliant
with the intended use.
1.4 Foreseeable misuse
Any use of the LRM2 other than under the
conditions specified in Section 1.3 and for
the specified purpose is strictly prohibited.
Particularly prohibited are use:
○
In an explosion protection zone.
