SKF Lincoln P653S, User And Maintenance Instructions

Page: 51 / 56

P653S Pump without follower (housing and reservoir – Parts list)
Item Description Part number Qty. Item Description Part number Qty.
1 Housing 316-16495-1* 1 41 Proximity switch 234-10423-6 1
2 Motor, drive 24 V DC 275702 1 42 Stirring paddle assembly 545-33093-1 1
3 Intermediate bottom 445-71524-1 1 43 Screw, hex, 8.8 M6 x 40c 200-12000-3 4
4 Pinion gear, drive 275557 1 44 Support sleeve, 4 l reservoir 445-71543-1 4
5 Threaded sleeve 445-71527-1 1 Support sleeve, 8 l reservoir 445-71542-1 4
7 Bearing D12/24 x 6 250-10683-1 1 Support sleeve, 15 l reservoir
2)
445-71528-1 4
Support sleeve, 20 l reservoir
2)
445-71536-1 4
8 Pump element, Z7 service kit 645-77196-1 3
9 Bearing D10/26 x 8 250-14009-7 1 45 Reservoir, 4 l w/ vent tube and labels 545-33045-1 1
10 Seal, radial ba 75 fkm 10 x 22 x 7 220-12231-3 1 Reservoir, 8 l w/ vent tube and labels 545-33044-1 1
Reservoir, 15 l w/ vent tube and
labels
3)
545-33041-1 1
11 Gear, eccentric 275558 1 Reservoir, 20 l w/ vent tube and
labels
3)
545-33043-1 1
12 Bearing D12/32 x 10 250-14064-6 1
13 Shaft f. drive with retaining ring
and key
445-71266-1 1 46 O-ring 72nbr 180.000 X 4.00 219-10684-6 1
47 Insert, reservoir 445-71532-1 4
14 Washer st 12 c -200 hv 209-13011-9 1 48 Screw, hex, 8.8 M6x20c 200-13022-7 1
17 Bearing D 8/22 x 7 250-14064-7 1
18 Cam, relief unit 545-33367-1* 1 49 Fixed paddle 444-70490-1 1
50 Cover, reservoir 444-70641-1 1
20 Press ring 444-24439-1 1 55 Pressure transducer with seal ring 234-10663-6 1
21 Screw, sock,hex. 8.8 M 5 x 20c 201-12016-8 1
22 O-ring 72NBR 180,00 x 4,00 219-10684-6 1 56 External pressure transducer 234-10825-3 1
57 Cable assy, 10 m. 4/4 pole (shielded) 664-34741-7 * 1
23 O-ring 72NBR 195,00 x 3,00 219-10390-3 1 58 Connector for external pressure
switch/transducer
664-34550-6 1
24 Rocker arm, assembly, relief unit 545-32906-1 1
25 Not used 1 59 Cable assy, 10 m, 7/7 pole 664-34428-3 1
60 Connector for signal cable 7 poles
(AC pump)
664-34569-1 1
26 Not used 1 Connector for signal cable 7 poles
(DC pump)
664-34303-7 1
27 Cover, housing for AC pumps 278671 1
28 Housing fr. cover w/ sealed
keyboard
545-33602-1 1 61 AC power cable plug 236-13277-9 1
63 Plug, 7 pole jumper 664-34741-7 1) 1
29 Profile packing 545-33596-1 1 64 Power supply 275906 1
30 Printed circuit board 24 V 1) 236-10655-3S 1
31 Cover, housing for DC pumps 275666 1 66 Internal cable for ac pump 664-34569-2 1
67 External pressure switch 234-10825-4 1
32 Screw, sock, hex. 8.8 M 5 x 16C 201-12016-6 4 68 Protect. washer w/ access. F. P. P603/653 545-34361-6 1
33 Relief element 545-33042-1 1
35 Screw,6.0 x 40 with seal 220-14101-1 206-13710-6 3 69 Valve SVTE – 400 – R1/4 + NIP.
S2520 – 1 /
4
in bag
624-77150-1 1
-- Horizontal mounting bracket 271249 1
37 Pressure switch with seal ring
209-12158-6
234-10723-8 1 -- Adapter s2520 – 1 /
4
– 1 /
4
– 25 226-14105-5 1
39 Screw w/ washer 206-13796-9 4
40 Adapter m22 x 1.5 w/ grease
fitting 251-14045-9
304-16543-1
1)
1
1)
When replacing printed circuit board 236-10655-3S©, special attention must be given to jumper
settings. Replacement printed circuit boards are shipped with a standard factory setting.
For pump to work properly, replacement printed circuit board jumper settings must duplicate
original printed circuit board.
2)
Components available in kit to convert 4 and 8 liter to 15 liter – 276764.
3) Components available in kit to convert 4 and 8 liter to 20 liter – 276765.
* Indicates change.
51