manualshive.com logo in svg

SKF CAHB-20 Series, Installation, Operation And Maintenance Manual, Page: 33 / 60

Share
Download
SKF CAHB-20 Series Installation, Operation And Maintenance Manual Download Page 33

7.3 Action during operation

7.3.1  Normal operation

During normal operation, the linear actuator lifts and lowers the ele-

ments that are connected with the CAHB-2…linear actuator via the 

hinge head.

For all CAHB-20E and the CAHB-21E and CAHB-22E without 

Limit switches option, the clutch will activate if the linear actuator is 

completely extended or retracted. In case of optional limit switches or 

external limit switches installed on the application, the actuator will 

stop  before to reach the mechanical end stop and the clutch 

activation.

Use only the actuator within the specified limits.

Don’t place any of your body, hands, or arms near moving 

components

 



CAUTION

Material damage through overheating!

Therefore:

• Only use control integrated thermal switch.

• Never exceed nominal load.

• Always adhere to idle times and operating times  

(refer to technical data in chapter 

11 Appendix

).

33

Summary of Contents for CAHB-20 Series





























































Reviews:

No comments