4.2 Brief description
Fig 8
Overview
This actuator is to be used exclusively for installation into a dynamic
centric-compression or tensile-loaded lift.
The linear actuator consists of a motor part (
4
), a gear unit (
7
) and
a linear unit (
3
), connected with each other by a bayonet joint.
The actuator consists of a direct current motor with helical gear
which sets in motion a gear transmission system. Via the driving
screw and nut,the rotation of gear is transformed into a linear
motion of the actuator.
The front hinge head (
1
) and the rear hinge head (
6
) transmit the
actuator power to both sides of the application.
18
