5.1.2 Return to the
manufacturer
Proceed as follows for the return transport:
1
Dismantle the actuator if necessary (refer to chapter
10
Dismantling
).
2
Pack the actuator in its original packaging. Follow storage condi-
tions (refer to chapter
5.2 Storage
).
3
Send to manufacturer.
5.1.3 Packaging
For packaging
The individual packaged pieces have been packaged appropriately
according to the expected transport conditions.
The packaging is supposed to protect the individual components
from damage caused by the transport, corrosion and other damage
until they are ready for installation. Therefore, do not destroy the
packaging and only remove the actuator shortly prior to the installa-
tion. Keep packaging for possible return shipment to the manufac-
turer (refer to chapter
5.1.3 Packaging
).
If the packaging is to be disposed off, please adhere to the
following:
Handling of packaging materials
NOTE
Packaging material consists of valuable raw materials, which, in
many cases, can be recycled.
Therefore:
• Dispose of packaging material in an environmentally
correct way.
• Comply with locally applicable disposal regulations.
24
