- 38 -
EN
951-180-074-EN Version
03, last updated
2019 / 07
7. C
ommissioning, operation
7.2 Operation
SKF centralized lubrication systems operate largely automatically.
The activities required during normal operation are limited primarily
to inspection of the fill level and timely refilling of lubricant.
IMPORTANT NOTE
The condensation water drain device on the motor must not be
unscrewed while the AC motor is running.
7.2.1 Filling the gerotor pump units
The gerotor pump units are filled by the customer externally, typi-
cally via a lubricant supply line.
Refer to the operating instructions from the system manufacturer.
Immediately switch off the gerotor pump unit if any irregularities are
identified during commissioning/operation. Determine and remedy
the cause of the malfunction with the aid of Chapter 10, “Malfunc-
tions table,” as well as the documentation from the supplier.
The possible malfunctions listed may be indicative of other root
causes. Take account of all operational factors and machine compo-
nents during troubleshooting.