manualshive.com logo in svg

SKC AirChek 3000, Operating Instructions Manual

Share
Download
SKC AirChek 3000 Operating Instructions Manual Download Page 47

www.skcltd.com 

210-3311M Issue G 

Page 45

Care of the Battery Pack

Battery Testing

1.  Connect SKC approved charger to battery pack. If charger indicator LED illuminates, battery pack charger 

input is ok. If charger LED does not illuminate, battery pack input fuse is blown - Replace battery pack.

2.  Leave battery pack connected to charger to fully charge.
3.  If pump does not function at all after full charge of battery pack, battery pack output fuse has blown, or 

battery cells have failed or are at end of life - Replace battery pack.

4.  If pump functions after full charge of battery pack but gives significantly reduced run times before low 

battery shutdown, battery cells are failing or are at end of life - Replace battery pack.

Battery Replacement 

Refer to the pump component diagram on page 46. Unfasten the two security screws securing the battery 
pack to the pump using the supplied 2mm A/F Allen key. Carefully pull the battery pack downwards to 
disconnect from the pump case.
Fit the replacement battery pack to the pump, taking care to ensure that the battery output connector engages 
with the socket in the base of the pump case. Secure the battery pack with the two security screws. Charge 
the new battery pack fully before use.

Battery Disposal

• 

The EC Battery Directive and equivalent legislation in other countries requires that all batteries and battery 
packs are disposed of correctly at the end of their working life. This means that they must be collected and 
treated separately from other waste.

• 

Please ensure that any end-of-life SKC battery packs are collected and recycled or disposed of correctly.

Summary of Contents for AirChek 3000





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands