manualshive.com logo in svg

SKC AirChek 3000, Operating Instructions Manual

Share
Download
SKC AirChek 3000 Operating Instructions Manual Download Page 11

www.skcltd.com 

210-3311M Issue G 

Page 9

Specifications

Pump Features

Flow fault function

Indicates flow fault due to obstructed tubing or excessive filter loading. Shuts 
the pump down and enters ‘HOLD’ mode if the condition persists for longer 
than 15 seconds. Automatically attempts to restart every five minutes (up to 
a maximum of 10 restarts), until the flow fault condition clears in which case 
normal running will resume.

Programmable run time

Sample run time programmable in minutes, via keypad and LCD screen. 
Pump automatically shuts down at end of sample and retains run time data.

Programmable delayed 
start time

Sample start delay time programmable in hours and minutes, via keypad and 
LCD screen.

Particulate trap

Built in replaceable filter to trap particles that would otherwise contaminate 
the pump mechanism.

Automatic air flow rate 
calibration

With optional Defender primary calibrator and CalChek Communicator cable. 
Enables automatic calibration of the sample air flow rate to the required level.

PC Connectivity

With optional DataTrac USB adapter cable and PC software. Enables 
programming of timed sample runs, delayed starts and intermittent sampling. 
Enables retrieval of pump run-time data and history to the PC.

Summary of Contents for AirChek 3000





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands