manualshive.com logo in svg

SKC AirChek 3000, Operating Instructions Manual

Share
Download
SKC AirChek 3000 Operating Instructions Manual Download Page 46

Page 44 

210-3311M Issue G 

www.skcltd.com

Care of the Battery Pack

Battery Charging

• 

Charge battery pack fully before first use to ensure optimum performance.

• 

Full battery capacity will be acheived after 2 to 3 full charge / discharge cycles.

• 

Use only SKC approved charger designated for this battery pack. Use of a non-SKC approved charger 
may impair battery performance or even cause irrepairable damage, and will invalidate the battery pack 
warranty.

Battery Performance

• 

Charging temperature - For optimum performance charge NiMH batteries between 0 and +45°C.

• 

Do not overcharge - For optimum performance disconnect battery pack from charger after 24 hours.

• 

Discharge temperature - For optimum performance discharge NiMH batteries  between -10 and +45°C 
(refer also to pump specifications on pages 6 and 7 for other limitations on operating temperature for 
intrinsically safe applications).

Battery Maintenance

• 

Battery cycling during regular use - To maintain optimum capacity during regular battery use, cycle battery 
once a month. Run pump until low battery shutdown occurs, then fully charge battery.

• 

Long term storage and highly infrequent use -
1.  Charge battery fully prior to long term storage. Disconnect battery pack from pump.
2.  Store in a cool, dry place at temperature between 0 and 30°C.
3.  Recharge battery at least once a year (or more frequently if stored at temperature above 30°C).
4.  Cycle battery 2 to 3 times after long term storage to restore optimum capacity.

Summary of Contents for AirChek 3000





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands