manualshive.com logo in svg

SKC AirChek 3000, Operating Instructions Manual

Share
Download
SKC AirChek 3000 Operating Instructions Manual Download Page 24

Page 22 

210-3311M Issue G 

www.skcltd.com

User Interface Level One

1) Setting and Manual Calibration of the Pump Flow Rate

1.  Set up the sample train as specified in the sampling method and connect to the pump air inlet port. 

Connect a calibrated flow meter such as a Defender primary flow calibrator to the inlet of the sample 
train.

2.  With the pump in HOLD mode, press [

] to switch to RUN mode, and allow the pump to run for at 

least 5 minutes before commencing setting and calibration of the flow rate.

3.  Enter User Interface Level One as detailed in Getting Started 7) on page 19.

4.  The first User Interface screen displayed is the flow setting screen, with ‘

SET

’ 

flashing.

5.  Use the   and   buttons to increase or decrease the flow setting, in steps of 10 

ml/min, to the required flow rate on the LCD screen.

6.  When the required flow rate is set press the   button to display the flow rate 

adjust screen, with ‘

ADJ

’ flashing.

7.  Set the calibrated flow meter to take continuous readings, and observe the 

indicated flow rate. Use the   and   buttons to adjust the pump flow rate up or 
down in steps of 10 ml/min, until the calibrated flow meter indicates the required 
flow rate to within ±10 ml/min.

Summary of Contents for AirChek 3000





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands