SKC AirChek 3000, Operating Instructions Manual

Page: 35 / 68

www.skcltd.com 210-3311M Issue G Page 33
User Interface Level Two
memory without deleting the sample run time first. Likewise, if a DataTrac program is present in the pump
memory, the sample run time setting in the User Interface cannot be selected until the DataTrac program
is deleted - refer to User Interface Level Two 6) on page 36.
• When entering a DataTrac program using the optional DataTrac Interface and Software and a PC, it is
possible to enter a sample run time of up 43,200 minutes (30 days). When a DataTrac program is present
in the pump memory the LCD screen will display the ‘PROG’ icon. The elapsed run time screen will display
the elapsed run time rather than counting down the sample run time as with a sample run time set on the
pump.
4) Deleting a Sample Run Time
1. To delete a previously set sample run time, enter User Interface Level Two as detailed in Getting Started
7) on page 19.
2. Press the button until the sample run time setting screen is displayed with the
currently set sample run time flashing.
3. To delete the sample run time use the button to reduce the sample run time
setting to zero.
4. To save the zero sample run time setting, press the button until the ‘End’
screen is displayed. Press [
] to save the setting and switch to HOLD mode.