16
Stand Assist Poles
Chair
Seat
Assist
A Series Advanced Model
B Series Advanced Model
B Series Model
Seat Assist (if equipped):
WARNING:
The wheel
locks should be in the brake
position before operating the
Shuttle.
Ensure all persons and objects
are clear of the Shuttle when
changing its positions.
DO NOT use the footrest as a
step when the user sits on or
gets off the Shuttle.
If equipped with stand assist poles, place in the indicated position at
the front of the Shuttle. The stand assist poles are stored on each
side of the Shuttle between the front and rear casters.
To adjust the chair into seat assist position, the Shuttle must be in
chair position. Using the controller press the seat assist button.
Hand Control
These are instructions for the general functions of the Shuttle; any special or unique functions
will be referenced to in different sections of this manual.
Make sure the Shuttle is correctly positioned and connected to
a grounded 110V AC outlet.
WARNING:
Electrical shock or malfunction
may occur if hand control cord is pinched or
frayed. Keep away from moving parts.
The buttons and switch perform the following operations:
A.
Stretcher (Table) Position
B.
Elevate Up
C.
Position Down
D.
Trendelenburg (feet higher than head)
E.
Reverse Trendelenburg (head higher than feet)
F.
Chair Position
G.
Recline Position
H.
Seat Assist Position