SIYI VD32 User Manual Download Page 9

Page: 9 / 106

VD32 Remote Controller User Manual v1.2

- 9 -

2020 SIYI Technology Copyright

Do not charge the transmitter when temperature is high or battery temperature is over

60℃.

DANGER

Keep VD32 away from any places that babies or kids may reach easily while it is under

charging, better there is supervision from an adult in case of emergency.

1.4 Precautions on Using SD Card

Do not disassemble, bend, press, abandon or damage SD card by any means.

Stop using the SD card if you find it soaked by water, oil or any other chemical liquid.

CAUTION

A SD card is also an electronic product, keep it away from static electricity.

Keep the Micro-SD card slot clean in case of blocking by sand or dirt.

Keep the SD card in slot while you are downloading or uploading data; taking out it

mistakenly, hitting it or shattering it may cause damage or data loss.

Keep the SD card away from places that a baby or a kid may reach in case that it was

swallowed mistakenly by the baby/kid.

Summary of Contents for VD32











































































































Search results

Summary of Contents for VD32

Reviews:

Related manuals for VD32

Brands by name

Popular brands

SIYI VD32, User Manual

Search results

Summary of Contents for VD32

Reviews:

Related manuals for VD32

Brands by name

Popular brands