VD32 Remote Controller User Manual v1.2
- 69 -
2020 SIYI Technology Copyright
Joystk
(Joystick Mode): Switch the joystick mode from Mode 1 / Mode 2 / Custom.
Vibrtn
(Vibration): Turn on / off the vibration alert function.
Voice
(Voice Broadcast): Turn on / off the voice broadcast function.
TxAlrt
(Transmitter Low Battery Level Alert): Set a limit for the transmitter battery level
lower than which transmitter will alert.
TxStat
(Transmitting Status): Turn on / off the radio signal transmitting.
RDStep
(RD Stepping Value): Set the stepping value (range: 1-100) of the right dial (RD).
Higher it is, more channel value the channel value increases in a single movement.
SttLck
(Setting Lock): When the setting lock is “ON”, password is required for entering the
transmitter setting menu (the default password is “8888”); when the setting lock is “OFF”,
no password is required.
RDVal
(RD Value): When it is “Unsaved”, the RD channel returns to the default channel
value (1500) the next time you power on the transmitter; when it is “Saved”, the RD channel
stays at the channel value before the last powering off.