SIYI VD32 User Manual Download Page 6

Page: 6 / 106

VD32 Remote Controller User Manual v1.2

- 6 -

2020 SIYI Technology Copyright

1 READ TIPS

1.1 Icon Definition

Please pay more attention to content indicated with the following marks:

DANGER

Dangerous manipulation that probably leads to human injuries.

WARNING

Warnings on manipulation that possibly leads to human injuries.

CAUTION

Cautions on what manipulation may lead to property loss.

Prohibited Mandatory Mark

1.2 Flight Safety

VD32 transmitting system is designed for professional application in specific

industries, users who approaches to the device should have at least the basic ability

to manipulate it. Any irregular or irresponsible manipulations of the device may

cause damages or lead to property loss and even human injuries. Non-adult users

must follow their trainer’s guidance or the supervision of an adult. Disassembling or

Summary of Contents for VD32











































































































Search results

Summary of Contents for VD32

Reviews:

Related manuals for VD32

Brands by name

Popular brands

SIYI VD32, User Manual

Search results

Summary of Contents for VD32

Reviews:

Related manuals for VD32

Brands by name

Popular brands