VD32 Remote Controller User Manual v1.2
- 59 -
2020 SIYI Technology Copyright
3.
Please refer to the picture below. Under fail-safe menu, the function is default to
be off and it displays “HOLD” in each channel. Under this circumstance, if your
transmitter lost linkage with sky station, the receiver will output the last channel
value received from your transmitter.
4.
Tap on “OFF” and switch it to “ON” to activate Fail-Safe function.
5.
When the function is turned on, tap on a channel according to your
requirement and switch “HOLD” to “0”, then use the virtual turntable to input
channel value;
6.
When the function is activated
,
you can also input channel value by manipulating
a joystick, a switch, a button, or a dial which is mapped with the channel; input
a target value, tap on “SET” to finish;
7.
The virtual turntable helps users to adjust channel value more accurately when
it is very close to the target value.
