VersaTRAK RTU User M anual
Page 7 of 31
Last Revised: 05/23/02
SIXNET
••••
Box 767
••••
Clifton Park, NY 12065 USA
••••
+1 (518) 877-5173
••••
FAX +1 (518) 877-8346
••••
Panel
Assembly
A VersaTRAK or Mini-VersaTRAK RTU and power supply mount directly to the subpanel
in your enclosure. SIXNET I/O modules snap onto DIN rail strips fastened to the subpanel.
Recommended DIN rail spacing is 8 inches (20 cm). This spacing allows room for wire duct
to be installed without obstructing field wiring installation.
SIXNET I/O modules are typically installed against one another, but space can be left between
modules to accommodate other DIN rail mounted components such as terminal blocks. End
clamps are recommended to restrict side-to-side movement. Upcoming figures show the
physical dimensions of the VersaTRAK components. Refer to the manuals for SIXNET I/O
modules for their mounting dimensions.
SIXNET I/O and RTU components can be installed in any orientation and order on your
panel. The modules are typically interconnected using ST-Bus wiring, beginning with the
VersaTRAK RTU. Refer to Section 3 for more information on ST-Bus wiring.
Sample Panel Layout
For a 36” x 30”
Enclosure
DIN EN 50022 Suppliers
Manufacturer Type
Altech PR30
Entrelec TS35
Phoenix NS35/7.5
Wago TS35
Weco H-35
Weidmuller TS35
Wieland TS35
