VersaTRAK RTU User M anual
Page 17 of 31
Last Revised: 05/23/02
SIXNET
••••
Box 767
••••
Clifton Park, NY 12065 USA
••••
+1 (518) 877-5173
••••
FAX +1 (518) 877-8346
••••
Mini-VersaTRAK
Analog Inputs
The Mini-VersaTRAK RTU has eight analog input channels that accept loop powered or self
powered 4-20 mA signals.
Analog Input
Wiring
One screw terminal (17) is provided for the return wires from all input channels. One terminal
is provided for each analog input signal. If any of your 4-20 mA transmitters require loop
power, connect 24 VDC into the loop as shown below. (The 24 VDC may come from an
external DC power source or from the VT-PS-024-01N power supply.) Connect all self-
powered 4-20 mA input field devices as shown in the diagram below.
Analog Input
Scaling
These 4-20 mA inputs are reported as unscaled values from 0 to 32767. Refer to the SIXNET
I/O Tool Kit online help system for more information.
Open Loop
Detection Feature
The SIXNET I/O Tool Kit configuration program provides a selection that allows inputs
below 4 mA to be reported as zero, or be reported as negative values to detect loop failure.
Replaceable
Current Shunts
Mini-VersaTRAK RTUs have a replaceable 100 ohm precision current shunt for each analog
input, should a faulty field device or wiring error causes the original shunt to overheat.
Note:
Shunt replacement requires Mini-VersaTRAK disassembly. Consult
SIXNET
for
details should shunt replacement become necessary.
Mini-VersaTRAK On-board Analog Input Connections
