Introduction to Components
3-5
3.2.2.2 Display Interface
Fig. 3-4 Sketch Map of Display Interface
The sketch map of the display interface is shown in Fig. 3-4. Some of the curves or
marks are displayed automatically while some of them can be displayed only by
operation.
MI will give relevant prompt for the possibility of ultrasound beam mechanical biological
effect (e.g. cavitation), MI
≤
0.83.
The parameter items in the control window are slightly different due to different display
modes and probe models.
The parameter items shown in the control window of Fig. 3-4
are parameters for B mode with convex probe (
Angle
is replaced by
Width
for linear
probe). For M mode, there are:
depth
,
M Gain
,
Freq
(probe frequency),
PWR
(acoustic
power),
PER
(persistence),
SMO
(smooth),
ENH
(edge enhancement),
DYN
(dynamic
range) and
MSP
(M sweep speed); for B/M mode, there are:
depth
,
B gain
,
M gain
,
Freq
(probe frequency),
PWR
(acoustic power),
PER
(persistence),
SMO
(smooth),
ENH
(edge enhancement),
B GSC
(B grayscale curve),
DYN
(dynamic range),
Angle
(which
is
replaced by
Width
for linear probe),
MSP
(M sweep speed) and
LD
(line density). Frame
rate is not displayed in M mode.
Exam type
SIUI
Facility Name
System Model
Probe (Model)
Frame
MI
Depth
B Gain
Freq
PWR
PTN
SPAN
PER
SMO
ENH
B GSC
DYN
Angle
LD
Current
function
indicator
(TGC curve)
Control w
ind
o
w
Focal area mar
k
Image area
Coordinate scale
Meas
result d
is
p
la
y
ar
ea
Date/time
Day of the week
Current frame/total frame
Probe orientation mark
(Cineloop state)
Grayscale
Body
mark
Patient information