16
[Name]
Define NV bit image
[Format]
ASCII
FS
q
n [xL xH yL yHd1...dk]1...[xLxH yLyH
d1...dk]n
Hex
1C 71n [xLxHyLyHd1...dk]1...[xLxHyLyH
d1...dk]n
Decimal
28 113n [xLxHyLyHd1...dk]1...[xLxHyLyH
d1...dk]n
[Range]
1
≤
n
≤
255
0
≤
xL
≤
255
0
≤
xH
≤
3(
当
1
≤
(xL
+
xH
×
256)
≤
1023
0
≤
yL
≤
255
0
≤
yH
≤
1(
当
1
≤
(yL
+
yH
×
256)
≤
288
0
≤
d
≤
255
k=(xL
+
xH
×
256)
×
(yL
+
yH
×
256)
×
8
Total defined data area =192K bytes
[Description]Define the NV bit image specified by n .
•
n specifies the number of the defined NV bit image.
•
xL, xH specifies (xL + xH
╳ 256) ╳ 8 dots in
bitimage you are defining.
•
yL, yH specifies (yL + yH
╳ 256) ╳ 8 dots in
imageyou are defining.
[Note]
•
Frequently write command may be damaged NV memory. Therefore, it is
recommended to perform no more than 10 times a day, write the NV memory.
•
After put an image into NV memory process, the printer performs a hardware reset
the user-defined characters, download bitmap and macros should be defined after
the completion of the command. Printer Clear receive and print buffer and resets
when power efficient model. At this time switch is DIP check again. (Does not
support hardware reset interface)
•
This command cancels all been defined with this command NV bitmap.
•
From the beginning of the processing of this command till the finish of
hardwarereset,mechanical operations (including initializing the position of the
printer head whenthe cover is open, paper feeding by using the FEED button,
etc.) cannot be performed.
•
During processing this command, the printer is in BUSY when writing the data
to the NV user memory and stops receiving data. Therefore it is prohibit ted to
transmit the data including the real-time commands during the execution of this
command
。
•
NV bit image means a bit image which is defined in a non-volatile memory by FS q
andprinted by FS p.
•
In standard mode, this command is effective only when processed at the beginning
ofthe line.
•
This command is effective when 7 bytes <FS yH> is processed as a normal value.
•
When the amount of data exceeds the capacity left in the range defined by xL, xH,
yL,yH, the printer processes xL, xH, yL, yH out of the defined range.
•
In the first group of NV bit images, when any of the parameters xL, xH, yL, yH is
out of thedefinition range, this command is disabled.
•
In groups of NV bit images other than the first one, when the printer processes xL,
xH, yL,yH out of the defined range, it stops processing this command and starts
writing into theNV images. At this time, NV bit images that haven¡¯t been
defined are disabled(undefined), but any NV bit images before that are enabled.
•
The d indicates the definition data. In data (d) a 1 bit specifies a dot to be printed
and a 0bit specifies a dot not to be printed.
•
This command defines n as the number of a NV bit image. Numbers rise in order
from NVbit image 01H. Therefore, the first data group [xL xH yL yH d1...dk]
is NV bit image 01H,and the last data group [xL xH yL yH d1...dk] is NV bit
image n. The total agrees with thenumber of NV bit images specified by
command FS p.
