16
STEP 6
- With reference to Fig. 4.8, carry out the operations in the following order:
Fasten the cylinders (1) to the frame (3) and (2) using the pins (4), washers (5) and pins (6).
Repeat the same operations on the other side of the machine
Item (4): 4 pins ø25x58 (ø1x2 5/16”)
Item (5): 4 washers ø25 (ø1”) DIN 125A
Item (6): 4 pins ø6x35 (ø1/4”x 1 ½”)
DIN 94
STEP 7
- With reference to Fig. 4.9
carry out the operations in the follow-
ing order:
1) Fasten the cylinder (1) on hitch
point (5) with pin (2), washer (4),
nut (3). The lever of valve of cyl-
inder (1) are content in accesso-
ries bag.
2) Fasten the cylinder (6) with pins
(7), spacer (8), washer (4), nut
(3). Pay attention on position of
valve (9).
3) Repeat the same operations on
the other side of the machine
Item (2): n°2 pins ø20x60 (ø25/32"x2"23/64)
Item (3): n°4 nuts M16 DIN 980.
Item (4): n°4 washers ø17 (ø21/32") DIN 125A
Item (7): n°2 pins ø20x125 (ø25/32"x4"29/32)
Item (8): n°4 spacer ø20-34x23 (ø25/32"-1"21/64x57/64)
4.8
4.9
Summary of Contents for QRX 12
Page 1: ...ASSEMBLY USE AND MAINTENANCE QRX 12 14 201600 ...
Page 2: ......
