14
STEP 4
- With reference to Fig. 4.6, carry out the operations in the following order:
1) Connect the inclined drawbar (1) to the horizontal drawbar (2) using bolts (3) and nuts (4). Fasten the
hitch for the tractor (5) to the drawbar (1) using the two pins (6), the fastening bolts (8) and the washers
(7).
2) To adjust the hitch (5), see section 5.1
3) Fasten the parking stand (9) to the drawbar (1), using the pin with handle (10) and R-clip (11).
4) Attach the hose bracket (12) in its place on the drawbar (1) using the bolt (14), washer (13) and nut (15).
5) Attach the manual canister (16) at point (A) on the drawbar (2) using the bolts (17), washers (18) and
nuts (19). Note: all the manuals and documents regarding the machine must be kept in the manual can-
ister (16) so that they may consulted at any time.
Item (3): 6 bolts M16x50 (5/8”x 2”) DIN 931
Item (4): 6 nuts M16 (5/8”) DIN 980
Item (6): 2 pins ø25x124 (1“x5“)
Item (7): 2 washers ø12-36x2.5 (ø15/32”-1”27/64x 3/32”)
Item (8): 2 bolts M12x20 (15/32”x13/16”) DIN 933
Item (10): 1 pin ø15x78 (ø19/32”x 3 1/8”)
Item (13): 1 washer ø12-36x2.5 (ø15/32”-1”27/64x 3/32”)
Item (14): 1 bolt M12x35 (15/32”x 1 5/8”) DIN 933
Item (15): 1 nut M12/36 (15/32”) DIN 980
Item (17): 3 bolts M6x20 (0.24“x0.79“) DIN 933
Item (18): 6 washers ø6.6-18x2 (ø0.26”- 0.71”x0.08”)
Item (19): 3 nuts M6 (0.24”) DIN 980
4.6
Summary of Contents for QRX 12
Page 1: ...ASSEMBLY USE AND MAINTENANCE QRX 12 14 201600 ...
Page 2: ......
