5
4)
DANGER
Now, making sure that hoses 1 follow a way without twistings, tighten the collars 6 with the
screws 7. Note: the hoses 1 in the area F must be free to extend in the moment when the
machine’s frame is enlarged. Where it is necessary, lock the hoses 1 with the clamps 8. Now
(see points 1-2-3) tighten completely the hose 2.
In this step, you will use:
Item 1: 2 hose 3/8” l. 2100- 82.7” female ¾” jic – eye 3/8”
Item 2: see preceding steps
Item 3: 1 “T” fitting male ¾” jic
Item 4: 4 washer 3/8”
Item 5: 2 screws 3/8”
Item 6: 4 hose collars ø18 – ø0.71”
Item 4: 8 screws M8x60 (0.31” x 2.36”)
