38
Document NO.: RD-690-39-001 Version: A Date
：
2017.12.30
4.3.4.3.2
Operation
1)
By pressing the
【3】
key from the Output screen enters into the Out Grp to Device mode.
2)
Press direction key to select loop number, device number or output group number. If the output group number
shown is 000, then no output group has been assigned to the device.
3)
When the desired output group number is shown, press the
【
ENTER
】
button to confirm the selection.
4)
After that, it will change to the next device and the output group assignment process can be continued.
5)
Press
【
MENU
】
key to return to the previous menu.
4.3.4.4 Out Grp Delay(Menu Item 4-4)
4.3.4.4.1
Description
The output devices like output module or sounder/visual alarm of the zone will delay action till the delay time expire.
The delay time is from 00:00(minute: second) to 09:59, maximum about 10 minutes. If the time is 000, then no delay
has been assigned to the zone.
4.3.4.4.2
Operation
1)
By pressing the
【
4
】
key from the Output screen enters into the Out Grp Delay mode.
2)
Press direction keys to select output group number, status, minutes, seconds.
3)
The status of output group delay is the IMMEDIATE or DELAYED. DELAYED indicates the delay time will
assigned to the output group.
4)
Press
【
ENTER
】
key to confirm the selection.
5)
Press
【
MENU
】
key to return to the previous menu.
4.3.5
Device set-up
4.3.5.1 Loop Status(Menu Item 5-1-1)
4.3.5.1.1
Description
An individual addressable loop may be disabled or enabled. When disabled, no devices on the loop will report fire or
fault events and no outputs will activate.
However, audio/visual alarm devices will continue to operate in the Alarm Condition.
Disabled loops will be indicated on the LCD and can be reviewed using
【
DISABLED
】
key.
4.3.5.1.2
Operation
1)
By pressing the
【
1
】
key from the Device screen enters into the Loop Status mode.
2)
Press the
【
UP
】
or
【
DOWN
】
keys to select the loop status (ENABLED OR DISABLED).
3)
Press the
【
ENTER
】
key to confirm the selected status.
4)
Press
【
MENU
】
key to return to previous menu.
DD/MM/YY <Panel Status> HH:MM:SS
1. Loop Status 4.Inhibit Aux-Relay
2. Device Status 5.Timed-Sens
3. Device to Evacuate [Device]
Summary of Contents for GS690
