37
Document NO.: RD-690-39-001 Version: A Date
：
2017.12.30
4.3.3.3.2
Operation
By pressing the
【
3
】
key from the Input screen enters into the In Grp to Device mode.
Press direction key to select loop number, device number or input group number. If the input group number shown is
000, then no input group has been assigned to the device.
When the desired input group number is shown, press the
【
ENTER
】
button to confirm the selection.
After that, it will change to the next device and the input group assignment process can be continued.
Press
【
MENU
】
key to return to the previous menu.
4.3.4
Out Grp - Disable and Assign
4.3.4.1 Out Grp Status(Menu Item 4-1)
4.3.4.1.1
Description
Output group may be disabled and enabled.
Disabled output groups will be indicated on the LCD and can be reviewed using
【
DISABLED
】
key.
4.3.4.1.2
Operation
1)
By pressing the
【
1
】
key from the Output screen enters into the Out Grp Status mode.
2)
Press the
【
UP
】
or
【
DOWN
】
keys to select the output group number step by step or quickly. The status of the
output group will be displayed to the below of the output group number (ENABLED OR DISABLED).
3)
Press the
【
LEFT
】
or
【
RIGHT
】
keys to move the cursor between output group number and output group status.
4)
Press the
【
UP
】
or
【
DOWN
】
keys to select ENABLED or DISABLED status.
5)
Press the
【
ENTER
】
key to confirm the selected status.
6)
Press
【
MENU
】
key to return to previous menu.
4.3.4.2 Fault Out Grp (Menu Item 4-2)
4.3.4.2.1
Description
Output group can be configured to report fault Conditions. It is not recommended that the same Output, group are
used to report both Fault Conditions and Alarm Conditions.
4.3.4.2.2
Operation
1)
By pressing the
【2】
key from the Output screen enters into the Fault Out Grp mode.
2)
Press the
【
UP
】
or
【
DOWN
】
keys to select the output group number.
3)
Press the
【
ENTER
】
key to confirm the selected status.
4)
Press
【
MENU
】
key to return to previous menu.
4.3.4.3 Out Grp to Device(Menu Item 4-3)
4.3.4.3.1
Description
Output Devices like output module or sounder/visual alarm can be grouped together in up to 64 discrete output group.
DD/MM/YY <Panel Status> HH:MM:SS
1. Out Grp Status 3.Out Grp to Device
2. Fault Out Grp 4.Out Grp Delay
[ Output]
Summary of Contents for GS690
