Document NO.:RD-517-39-001
Version: B 2017.02.14
- 8 -
Diagram 12
Turn on the AC power. The green LED should be lit when
the alarm is operating from AC power.
Test smoke alarm using test button. The alarm will sound
3 short beeps – 1.5 seconds pause, then repeat it until the
button is released.
To prevent injury, this unit must be securely attached to the
ceiling in accordance with the installation instructions.
Service and Warranty:
Company warrants to the original consumer that each new
smoke alarm is to be free from defects in material and
workmanship under normal use and service for a period of 3
years from the date of purchase. This warranty does not cover
damage resulting from accident, misuse or abuse or lack of
reasonable care of the product. In no case shall company be
liable for any incidental or consequential damages for breach
of this or any other warranty express or implied
，
whatsoever.
The defective product can be mailed to the following address
with a detail explanation of problem.
If after reviewing this manual you feel that your smoke alarm
is defective in any way, do not tamper with the unit. Return it
for servicing to:
Manufacturer:
SITERWELL ELECTRONICS CO., LIMITED
ADDRESS:
NO.76 HAICHUAN ROAD CHUANGYE
ZONE B, JIANGBEI,NINGBO,CHINA
TEL : 0086-574-83076653
FAX : 0086-574-83076652
E-MAIL : [email protected]
