Technical manual Revo Block Professional
12
06/06/2016 Rev:2.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
7 - INCORRECT USE OF THE VACUUM CLEANER
It is extremely important NOT to use the system in the following circumstances which are considered to
be inappropriate and dangerous:
• The system must not be used to vacuum clean fabrics, heavy or hot/burning materials.
• The system must not be used to vacuum clean liquids.
Furthermore, the system has not been designed for use in environments with risk of explosion, and
therefore:
• it is forbidden to suction clean materials with high explosion risk (gunpowder) or materials which are
individually inert but that, once collected and mixed in the dust bin, could provoke dangerous chemical
reactions.
• It is absolutely forbidden to use the vacuum cleaner in explosive atmosphere or outside the standard
temperature, pressure and humidity levels.
•
Do not vacuum any material which may cause electrostatic charges in the piping system, if not
previously communicated to the constructor.
Any change or modification made to the system in order to suction clean a particular type of material
must obtain the prior written approval of the manufacturer.
The use of the system for purposes other than those which it was manufactured, represents an irregular
condition which can cause damage to the product and seriously compromise the operator’s safety.
6 - CORRECT USE OF THE VACUUM CLEANER
The Revo Block Professional vacuum cleaner has been designed exclusively to vacuum clean dust,
very small-size solids and dry materials
The intended use of the centralized system is related to domestic and civil environments, connected to
a tubing network and supplied by a normal electric network.
The vacuum cleaner can be installed in large domestic dwellings and large installations of the tertiary
sector, or installations requiring a continual and heavy use with the following characteristics:
- maximum recommended surface to be cleaned 1800 m
2
.
- piping network set up with pipes with 63/80 diameter and Ø 63/80 mm inlet coupling to the vacuum
cleaner.
- 220/240 V ac and 400 V ac single-phase power supply.
- air exhaust conveyed to the outside.
- the system can be used simultaneously by 3 operators (only if it has been suitably dimensioned).
5.6 Postazione di comando
The Revo Block Professional centralized vacuum system has control settings by which the apparatus
fuctioning can be configured by means of a simple operator interface display.
Through the control settings, it is possible to set and check the ordinary maintenance operations.
Whereas the work settings are located in the various rooms, thanks to the tube network. Therefore, the
operator does not come into contact with the machine during its use, apart from starting and use of the
centralized system.
Summary of Contents for 3203.1B
Page 1: ...w w w s i s t e m a i r c o m TECHNICAL MANUAL CENTRAL VACUUM SYSTEMS ByTecnoplus s r l...
Page 2: ......
Page 47: ......