QUICK START GUIDE
PE Wideband O2 Kit P/N: 50070102-01
See other side for more information
WARNING
The PE Wideband O2 is intended for off-road use only. This
device is NOT waterproof. The sensor will get hot when
powered and MUST be connected to the powered O2 module
when installed in a running engine. Failure to do so will damage
the sensor. Fuels containing lead or 2-stroke oil will degrade
the sensor.
Performance Electronics, LTD assumes no responsibility for
any damage that results from incorrect installation or misuse of
this product. It is up to the end user to verify the correct setup
and determine the suitability for his or her specific application.
WARNING:
Cancer And Reproductive Harm
www.P65warnings.ca.gov
Part Identification
A
B
C
D
E
F
G
H
A.
O2 Conditioning Module
B.
CAN Input Pigtail
C.
CAN Output Pigtail
D.
Bosch LSU 4.9 Sensor
E.
Mild Steel Weld In Bung
F.
Mounting Holes
G.
LED Status Indicator
H.
Bluetooth Pairing Button
