This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 22 rev.2 - last updating: 01/2015
Thank you
very much for buying one of our Siser TS DUE heat transfer presses.
We are sure you will capitalise on this excellent unit for years if you take the time to read these instructions
carefully.
Introduction
Please study these instructions carefully before transporting, mounting, using or maintaining the transfer press,
as they will give you important directions for a safe handling. Moreover you will find information about how to
order spare parts in this manual. Please retain these instructions for later reference in a safe, easily accessible
place. Please make sure that all operators of the transfer press have understood all instructions and graphic
symbols labelled on the press.
Accidents can also be avoided by strictly following the safety regulations according to the
machine directive
89/37/CEE replaced by 2006/42/CEE - 73/23/CEE replaced by
LVD 2006/95/CEE
– 89/336/CEE replaced by
EMC 2004/108/CEE
– EN 292/1 – EN 292 replaced by UNI EN ISO 12100 and UNI ENI ISO 12100-2 – EN
60204
.
It is specifically prohibited to remove or manipulate shrouds or legally compulsory labels or plates.
Contents
1. Warranty
2. Technical Data
3. Cap and Plate Sets
4. Operating the Transfer Press
5. Safety Regulations
6. Mounting, Transport and Mounting Location
7. Electrical Connection
8. Directions for Use
9. Maintenance
10. Dismantling and Disposal of Transfer Press
11. Spare Parts List
12. Exploded View
13. Electronic Diagram
14. Electronic Diagram board S2
15. Pneumatic Diagram