6.2 Station Mode Installation (cont.)
6.2.2 Daisy Chain
Make sure the P
WiFi™ PCB and antenna are connected to the P
™ PCB
ILOTINO
ILOTINO
that is used individually and another P
™ PCB that is being daisy chained.
ILOTINO
Connect the DMX IN/OUT wires to each of the P
™ PCB boards in a sequence, similar
ILOTINO
to a daisy flower ring, to each corresponding connector that are being daisy chained.
Power on the P
™ PCB boards once proper wiring connections are done to eliminate
ILOTINO
short circuiting the boards.
Connect the P
WiFi™ PCB to a router
PS procedure (for more details see chapter 8.1).
ILOTINO
by a W
Also connect the smartphone to the router and use any Art-Net iOS or Android App to drive each
PI
™ PCB.
LOTINO
11
3307 West Street Rosenberg, TX 77471 USA - (281) 324-0908
Copyright © 2006-2021 SIRS Electronics Inc. All Rights Reserved
P
WiFi™ PCB Instruction Manual
ILOTINO
Updated 12/2021. Rev 2.7
Summary of Contents for Pilotino WiFi PCB
Page 1: ...E518483 ...
