9. Default Setting
To return the P
WiFi™ PCB to the default settings, press and hold the pairing button, for about 10
ILOTINO
seconds, until the indicator LED turns green and has blinked once.
The indicator LED will turn cyan after a few seconds to indicate the P
WiFi™ PCB is acting as an access point
ILOTINO
10. Mode LED Indicator
- Green Led Static: Power ON
- Cyan LED static: P
WiFi™ PCB
ILOTINO
working with the internal network
- Cyan LED slow blinking: Art-Net or sCAN signal present
- Blue LED static: Module connected to an external WiFi network
- Blue LED slow blinking: Art-Net or sACN signal present
- Blue LED fast blinking: Module disconnected from the external WiFi network
- White LED static: WPS connection
- White LED slow blinking: WPS connection failed
- Yellow LED: DMX signal present on J1 and J3 connector
19
3307 West Street Rosenberg, TX 77471 USA - (281) 324-0908
Copyright © 2006-2021 SIRS Electronics Inc. All Rights Reserved
P
WiFi™ PCB Instruction Manual
ILOTINO
Updated 12/2021. Rev 2.7
Summary of Contents for Pilotino WiFi PCB
Page 1: ...E518483 ...