8.2 IP Address
8.3 Art-Net App Connection
Art-Net App works on any compatible IOS or Android
Configure the WiFi settings and connect the smartphone device to the router in which will be connected on the
same network as the P
WiFi™ PCB
ILOTINO
.
Launch an application on the smartphone device that has configuration with Art-Net
After setting up the App on the smartphone device, a blue indicator LED on the P
WiFi™ PCB will blink slowly:
ILOTINO
Art-Net signal present!
The IP addresses are an identifier assigned from the router and are required for connecting devices to
access the network.
On a computer or smartphone device, access the Network & Internet settings and locate the P
WiFi™ PCB
ILOTINO
IP settings in the properties section to correctly set the Art-Net App.
Note: P
WiFi™ PCB support only a DHCP protocol.
ILOTINO
18
3307 West Street Rosenberg, TX 77471 USA - (281) 324-0908
Copyright © 2006-2021 SIRS Electronics Inc. All Rights Reserved
P
WiFi™ PCB Instruction Manual
ILOTINO
Updated 12/2021. Rev 2.7
Summary of Contents for Pilotino WiFi PCB
Page 1: ...E518483 ...