61 77 476 D 3495
36
D 3495
.
201.01.02
.
02
08.2007
8
Use of the X-ray sensor
Sirona Dental Systems GmbH
Parallel technique with radiation limiter!
Operating Instructions and Installation
XIOS USB
4.
For vertical bite wing exposures:
Position the sensor holder vertically
on the hygienic protective sleeve in the middle of the sensor.
5.
For horizontal bite wing exposures:
Position the sensor holder
horizontally on the hygienic protective sleeve in the middle of the sensor.
X-ray exposure
1.
Position the sensor in the patient’s mouth.
2.
Place the X-ray tube assembly in the correct position. Change the
position of the sensor holder if necessary.
3.
Release an X-ray exposure.
4.
Dispose of the holder and the hygienic protective sleeve following the
patient examination.
5.
The guide rod and localizer ring must be sterilized.
8.3.4
Endodontics
Explanation
The "endo" type sensor holder is available for endodontics.
z
This sensor holder, the matching guide rod and the matching localizer ring
are color-coded
gray
.
z
It is used in the same way as the
EndoRay II
®
film holder system from
DENTSPLY Rinn
.
