Installation guide
FM 0120 E 1
26/07/10
Ind.
B
SIROCO S.A.S.
10 rue Jean Rostand - Z.I.
BP 135
69745 GENAS Cedex
Tel: +33 (0)4 78 90 96 96
Fax: +33 (0)4 78 90 15 98
www.siroco.fr
Page 2 of 6
1 - Device description
ARIZONA heater consist of a blower, a coil, a plastic part and a removable front plate. Plastic part is
made from polypropylene. Front plate is made from heat and impact resistant ABS. Heater can
operate under three different speeds: a control knob enables to select speed from front plate. There
are two input air supply (on heater side), an output air supply (on front plate) and an input-output
cooling water supply. Heater including an integrated valve controlled from front plate with a knob.
ARIZONA’s front plate is available in different colors : white, grey, anthracite or black. Heater can
be equipped with 600, 400 or 300 blower that supplied in 12 V or 24 V with connections pipes
diameters of 16 mm.
Product part numbers:
ARIZONA 600
ARIZONA 400
ARIZONA 300
Voltage
Front plate
color
Part number
Part number
Part number
White
0120 0001
0120 0101
0120 0201
Grey
0120 0002
0120 0102
0120 0202
Anthracite
0120 0003
0120 0103
0120 0203
12 V
Black
0120 0004
0120 0104
0120 0204
White
0120 0005
0120 0105
0120 0205
Grey
0120 0006
0120 0106
0120 0206
Anthracite
0120 0007
0120 0107
0120 0207
24 V
Black
0120 0008
0120 0108
0120 0208
Blower
Air outlet
Heat exchanger
Water output
Polypropylene
plastic part
Electrical wires
(cross-section 1,5 mm
2
)
Valve control knob
Valve
3 speeds control knob
Water input
Double poles
connector
ABS front plate
(supplied sectional)
Knobs location