16
You will need to remove the plaster from the wall around the fire enough to be able
to fix a sheet of master board or non- combustible board over the fire box when in
place to be able to be plastered to a finish ready to be decorated.
SECTION 7.2 FITTING THE BURNER TRAY
Temporarily fit the burner tray and ensure a suitable gas route can be achieved.
This process is a simple reverse of the previous instructions on how to remove the burner
tray.
On the remote version please take care not to pull or overstretch the electrical connections as
this may cause the fire to fail on commissioning.
600 and 1000 Models
