background image

FP10-27-11-50-OLOAKS ELECTRIC FIREPLACE HEATER 

ASSEMBLY AND OPERATION MANUAL

 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

CAUTION / ATTENTION    --    DO NOT PLUG THE HEATER INTO ANY 
POWER OUTLET OR OPERATE BEFORE READING ALL 
INSTRUCTIONS! 
 

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE 

When using electrical appliances, basic precautions should always be followed to reduce the 

risk of fire, electric shock, and injury to persons, including the following: 

 

1.

 

Read all instructions before using this fireplace.    Failure to follow these important safety 

instructions  may  cause  fire,  electric  shock  or  damage.    Following  proper  safety  and 

operating instructions is the responsibility of the owner.   

2.

 

WARNING: This fireplace heater is hot when in use. To avoid burns, do not let bare skin 

touch  hot  surfaces.  The  grill  directly  in  front  of  the  heater  outlet  becomes  hot  during 

heater operation.   

3.

 

CAUTION  –  High  Temperature.  Keep  any  materials,  such  as  upholstered  furniture, 

pillows,  bedding,  papers,  plastic,  clothes,  curtains  and  other  furnishings  at  least  3  feet 

away from the front, sides and rear of the heater element. 

4.

 

WARNING: This appliance gets hot and it contains internal parts that could arc or spark. 

Do  not  use  it  in  areas  where  gasoline,  paint,  or  flammable  liquids  are  used  or stored  or 

where the unit will be exposed to flammable vapors.    Do not use near propane tanks.   

5.

 

WARNING:  This  fireplace  should  not  be  used  as  a  drying  rack  for  clothing.    Do  not 

hang Christmas stocking or any decoration on the fireplace heater or mantle.     

6.

 

Extreme caution is necessary when any heater is used by or near children or those with 

disabilities.   

7.

 

Do not operate the heater unattended or while sleeping.    Stay alert and monitor operation 

at all times. 

8.

 

Always unplug fireplace when not in use. 

Summary of Contents for FP10-27-11-50-OLOAKS














Reviews: