Discharge Hose Installati on
Att ach a Hose, Hose Adapter, Clamp and Small O-Ring Seal to the Pump’s
Outlet port.
Opti onal Garden Hose Adapter
An Garden Hose Adapter is supplied
with the Pump for connecti ng a garden
hose to the Pump’s discharge port. Use
Large O-Ring Seal between Garden Hose
Adapter and Pump Outlet port. Hand
ti ghten the Adapter just enough not to
leak and then att ach the garden hose to
the adapter.
Priming the Pump
Before starti ng the engine, remove the fi ller cap from the pump
chamber and completely fi ll the pump chamber with water.
Reinstall the fi ller cap and ti ghten securely.
Starti ng the Pump
Cold Start
Move the Choke Lever to the closed positi on.
Warm Start
Leave the Choke Lever in the open positi on.
Move the Thrott le Lever away from the IDLE positi on to about
the halfway point.
WARNING
Do not over tighten Garden Hose Adapter.
If a garden hose is used and equipped with a shut off valve
or nozzle, do not shut off the discharge water for a long
period of time as that could cause the pump to overheat.
Do not install Garden Hose Adapter on the pump suction
port as it could damage the Pump.
WARNING
Operating the pump dry could
damage the pump seal.
8
9
