Press the Priming Bulb repeatedly until fuel can be seen in the
clear plastic fuel return tube.
Turn the Ignition Switch to the ON position.
Hold the carrying handle securely and pull the pull start rope
lightly until you feel resistance. Then pull briskly in the direction
of the arrow as shown below.
If the Choke Lever was moved to the CLOSED position to start
the engine, gradually move it to the OPEN position as the engine
warms up.
After starting the engine, move the Throttle Lever to the HIGH
position for priming and check pump output.
Pump output is controlled by adjusting the engine speed. Moving
the throttle to the HIGH position increases output while the LOW
position will decrease output.
Emergency Stopping
To stop the engine in an emergency, turn the Ignition Switch to
the OFF position.
Normal Stopping Procedure
Move the Throttle Lever to the LOW position.
Turn the Ignition Switch to the OFF position.
Slow
Fas
t
10
11
