2
Congratulations for choosing one of our products! We would like to remind you that we took the
safety of the operator, the efficiency of its use and the protection of the environment into great
consideration when designing and manufacturing this product.
In order to preserve its features over time, please read and follow these instructions carefully.
Particular attention must be given to the parts with the following symbol:
WARNING
as they contain important instructions regarding safety when using the high-pressure cleaner.
The Manufacturer is not liable for damage caused by:
•
failure to comply with these instructions:
•
use of the high-pressure cleaner not included in the list in the “DESIGNATED USE” section;
•
failure to comply with current safety regulations and regulations for the prevention of
accidents in the workplace when using the high-pressure cleaner;
•
incorrect installation
•
failure to carry out the anticipated maintenance;
•
modifications or actions without prior authorisation by the Manufacturer;
•
use of non-original or non-specific spare parts for this model of high-pressure cleaner;
•
repairs which were not completed by a Skilled Technician.
INTRODUCTION
TECHNICAL SPECIFICATIONS
MODEL
P
70
0/1
2
0
INPUT
VOLTAGE
230V 50 HZ 13A
MOTOR
(Induction)
2900 Watt
MAX PRESSURE
1
1
0 BAR
1595
PSI
WATER FLOW RATE
7
00 L/HR
RECOIL (WHERE N = 0.1 KG)
29 N
HOSE LENGTH
10 Metres
HOSE
Rubber
NOISE LEVEL
84
dB(A)
WEIGHT
43 KGS
VIBRATION
< 2.5 M/S²
DIMENSIONS LxWxH
189 x 161 x 370 MM
11
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY
WE
SIP LTD
GELDERS HALL ROAD
SHEPSHED
LOUGHBOROUGH
LEICSTERSHIRE
LE12 9NH
Declare that the
Tempest High Pressure Cleaners
P
700
/
12
0
Complies with the following EEC Directives their supporting Statutory
Instruments and the relevant standard where applicable:
98/37/EEC
Machinery Directive
EN 292-1/2
73/23/EEC
Low Voltage Directive
EN 60335-1
EN 60335-2-79
89/336/EEC
EMC Directive
EN 55014-1/2
EN 55104
EN 61000-3-2/3
2000/14 EEC
Noise Directive
EN ISO 3744
Signed:
Joint Managing Director
Date: 8th September 2003
