8
INTERRUPTED USE
Release the lever (9) on the cleaner gun and the high-pressure cleaner will automatically stop.
The high-pressure cleaner starts operating normally again when the lever on the cleaner gun is
pressed again.
WARNING
It is important to remember that the high pressure cleaner is still operational when it is in
‘Total Stop’ mode. Therefore, always put the main switch (1) in position “0”, remove the plug
from the mains power supply, press the lever (9) on the cleaner gun to eliminate any remaining
pressure and lock the safety protection device (10) (Fig. B), before leaving it unattended, even
SWITCHING OFF AND STORAGE
SWITCHING OFF
Shut off the tap for the water supply. .
Put the main switch (1) in position “0”. Remove the plug from the mains power supply. Release
any stored pressure in the cleaner by depressing the lever (15) on the cleaner gun for a few
minutes.
Wind the electric power cable up (4) and carefully hang it up on the handle (1).
Wait for the high pressure cleaner to cool down.
WARNING
When the high-pressure cleaner is left to cool down, take care that:
- the high-pressure cleaner is not left unattended in the presence of unsupervised children,
elderly or disabled people;
- the high-pressure cleaner is in a stable position and not at risk of falling over;
- the high-pressure cleaner is not in contact with inflammable materials, or in their immediate
vicinity.
STORAGE
Wind up the high-pressure pipe (17) carefully and avoid bending it.
Put the high-pressure cleaner in a clean and dry place making sure that the electric power supply
cable and the high-pressure pipe are not damaged.
CAUTION
The high-pressure cleaner is not frost proof. In order to prevent the formation of ice inside the
high-pressure cleaner keep the cleaner in a frost free area. Then before re-use the cleaner
should be brought into a warm enviroment and left to stand for a couple of hours to allow any
frost or ice which may have formed to melt before starting.
Where possible before commencing with the switching off and storeage procedures introduce
vehicle grade antifreeze into the cleaner to prevent ice build up.
If these instructions are not followed, the high pressure cleaner may be seriously
damaged.
5
16
18
19
17
15
14
13
11
10
6
7
20
5
4
3
2
1
12
9
8
GET TO KNOW YOUR HIGH PRESSURE CLEANER
