SIP SILVERCUT DISC 300 F ALP, Manual, Page: 167 / 190

Instruction for work
38
– Adjust the tines-kneading machine
intensity according to fodder quantity:
– Much fodder = more opened flap (B).
– Average fodder = flap in middle position.
– A little fodder = more closed flap (A).
–
In case of stoppings open the flap more.
3.6 Adjusting the tension of the cylinder-kneading
machine
The cylinder-kneading machine has a distance
between the cylinders from 3 to 5 mm, set by the
manufacturer, and two springs for adjusting the
tension of the kneading. Tension of the kneading can
be adjusted with nuts (1).
4. Preparing the mower for work and transport
position
– When preparing the machine for
transport and work position always
switch off the P.T.O.shaft. Switch off the
engine and pull out the ignition key.
Secure tractor against movements.
– When driving on public roads use the
protections according to regulations.
1
1
1A
1B
2